Our Products

ORIFICE PLATES
Orifice Plates Products:
Types of Orifice Plates.
  • Square Edged
  • Eccentric
  • Segmental
  • Quadrant Edge
  • Conical Entrance

    • Back to Top

    ORIFICE ASSEMBLIES
    Orifice Plates Products:
    Types of Orifice Plates.
  • Orifice Plate With Weld Neck Flange Union
  • Orifice Plate With Slip On Flange Union
  • Orifice Plate With Carrier Ring And Flange Union
  • Orifice Plate With RTJ Holder & RTJ Flanges

    • Back to Top

    R O & MULTISTAGE RESTRICTION ORIFICE ASSEMBLY
    R O & MULTISTAGE RESTRICTION ORIFICE ASSEMBLY Products:
    Restriction Orifice plates have traditionally been used to reduce pressure in gas and liquid flow by forcing the flow through a restricted bore. The precise pressure drop is produced by accurately calculating the orifice bore taking in to consideration relevant process and flow conditions.

    Back to Top

    METER RUNS
    METER RUNS

    Products:
    Meter runs are used for the measurement of small flow rates precisely where high accuracy of flow rates is required. They are generally supplies as a unit normally of 1M length to ensure the necessary straight pipe length to achieve highest possible accuracy.

    Back to Top

    NOZZLES
    NOZZLES Products:
    Flow nozzles are manufactured in accordance with ASME codes and standards. Flow nozzles are suitable for measuring liquids and gases and are commonly used for measure steam and water flow. They are manufactured strictly in accordance with ASME, MFC-3M,BS 1042 and ISO 5167. Flow nozzles are erosion resistant, consistently accurate and maintenance free.

    Back to Top

    AVERAGING PITOT TUBES
    AVERAGING PITOT TUBES Products:
    Averaging Pitot tube is a differential pressure producer suitable for liquid, gas and steam flow measurement. It offers simple, low cost installation into pipes and ducts, and high energy savings due to its low unrecovered pressure loss. There are no moving parts or sharp edges to wear, so long term accuracy can be maintained.

    Back to Top

    VENTURI
    VENTURI Products:
    A venture is suitable for measuring liquids, gases or steam flow. Since the venture offers no sharp edge protrusions into the flowing stream it is particularly useful in accurate flow measurement of any fluid containing suspended solids.

    Back to Top

    AEROFOIL
    AEROFOIL Products:
    Aerofoil is primary flow element used to measure flow in rectangular duct. It works on the principle of the relationship between flow velocity and the pressure fields In friction less flow. Since the air particles follow the curved streamlines above the upper surface there must be a centripetal force across the streamlines which is accelerating the flow towards the centre of the curvature.

    Back to Top

    BALL VALVES
    BALL VALVES Products:
    As per BS EN ISO 17292
  • SIZE : 15mm to 200mm
  • RATING : #150, #300, #800
  • MATERIAL : WCB, CFB, CFBM
  • ENDS : Falnged, Socket Weld, Screwed
  • ENDS : IBR Approved Valve

    • Back to Top

    FORGED STEEL VALVES
    FORGED STEEL VALVES Products:
    As per API 602
  • SIZE : 15mm to 50mm
  • RATING : #800 , #1500
  • MATERIAL : A105, F304, F316, F11, F22
  • ENDS : SOCKET WELD, SCREWED, BUTT-WELD
  • ENDS : IBR Approved Valve

    • Back to Top

    GATE VALVES
    GATE VALVES Products:
    As per API 600
  • SIZE : 25mm to 300mm
  • RATING : #150, #300
  • MATERIAL : WCB,CFB,CF8M
  • ENDS : FLANGED
  • ENDS : IBR Approved Valve

    • Back to Top

    SWING CHECK VALVES
    SWING CHECK VALVES Products:
    As per BS 1868 / API6D
  • SIZE : 25mm to 300mm
  • RATING : #150, #300
  • MATERIAL : WCB,CFB,CF8M
  • ENDS : FLANGED
  • ENDS : IBR Approved Valve

    • Back to Top

    TRUTORQ ACTUATORS & CONTROLS
    www.trutorq-actuators.com
    TruTorq Actuators & Controls Products:
    TruTorq actuators are compact Double Acting (DA) and Spring Return (SR) pneumatic actuators which are based on a double rack and pinion and Scotch Yoke design.
    TruTorq CNI Actuator is developed for corrosive & harsh environment.

    Back to Top

    LIMITORQUE ACTUATORS & CONTROLS
    www.flowserve.com
    Limitorque Actuators & Controls Products:
    The Flowserve Limitorque L120 and MX series cover Quarter Turn and Multi-Turn Electric Actuator, combined with the HBC and PT worm gear operator are used in gate and globe applications as well as slide and sluice gates for its reliability and consistency.

    Back to Top

    TRUGEARS (TRISOME PTE LTD)
    www.trisome.com.sg
    Trugears (TRISOME PTE LTD) Products:
    Trisome produced various type of Worm Gearbox, Bevel Gearbox, Manual Override, Manual Valve Position Supervisory and Manual Valve Quarter Spring Return Actuator.
    Trisome has own innovative products catering for the valves automation.

    Back to Top

    REXA (KOSO AMERICA, INC)
    www.rexa.com
    Rexa (KOSO AMERICA, INC) Products:
    REXA combines hydraulic, electronic and mechanical technologies to achieve state-of-the-art design for Linear, Rotary and Drive Actuator.
    Electraulic™ Actuation is the patented Flow Match System. This technically-advanced hydraulic circuit control the magnitude and direction of the actuator and result a smooth motion, exact positioning and instantaneous response.

    Back to Top

    TRUGEARS (TRISOME PTE LTD)
    www.koso.co.jp
    Trugears (TRISOME PTE LTD) Products:
    Koso is focus mainly on automatic control valves and isolation valve including minimum size and large size valves, low-pressure and ultra-high-pressure valves, extremely-low-temperature and ultra-high-temperature valves for various fields applications through dynamic processes.

    Back to Top

    SST VALVE (SERVE SERVICE TECHNOLOGY, INC)
    www.sstvalve.com
    SST VALVE (Serve Service Technology, INC) Products:
    SST provides state of the art production of SSV metal seated ball valves for high pressure isolation steam service in the power industry.
    SST's SSG valve is designed to meet the most demanding critical isolation service. Optional features include bi-directional flow, dual solids excluders, coatings and shut-off classes up to Class VI (bubble tight).

    Back to Top

    DELTAVALVE (DELTA INDUSTRIAL VALVE, INC)
    www.deltavalve.com
    DeltaValve (DELTA INDUSTRIAL VALVE, INC) Products:
    Delta is an industry leading manufacturer of high quality knife gate valves, specializing in zero leakages to Full ASME Pressure Class Differential.
    Delta Industrial Knife Gate Valves are proven in bi-directional tight shut off in severe service application with dual seat design. Its beveled–edge gate provide shear action between gate and seat.

    Back to Top

    TJ VALVES (TOMJOY ENGINEERING PTE LTD)
    www.tomjoy-engineering.com
    TJ Valves (TOMJOY ENGINEERING PTE LTD) Products:
    TJ abrasive service valve design is open body allows free flowing media and fines to be displaced by moving parts, therefore no packing or jamming in process service; pneumatic conveying, diverting of abrasive, erosive media and boiler blow down.
    TJ valve's rotating disc is made of high quality hard metal sealing surfaces for handling abrasive, erosive slurries and dry powdered media.

    Back to Top

    BSM VALVES (BSM VALVE, INC)
    www.bsmvalves.com
    BSM Valves (BSM VALVE, INC) Products:
    BSM manufactured specialty valves from bar or forgings in our state-of-the-art production facilities.
  • Ball Valves
  • Gate Valves
  • Through Conduit
  • Globe Valves
  • Needle Valves
  • Check Valves
  • Strainers
  • Specialty Fittings
  • Flanges

    • Back to Top

    BASSCAM (BASS VRI, LLC)
    www.basscam.net
    Basscam (BASS VRI,LLC) Products:
    Industrial Process High Temperature Cameras allow viewing flames up to 4000°F/2000°C in furnaces, boilers, rotary kilns, incinerators and thermal oxidizers in paper mills, power plants, steel mills, other primary metals processors, chemical plants and refineries and more.

    Back to Top

    ENOTEC (ENOTEC ASIA PTE LTD)
    www.enotec.com
    Enotec (ENOTEC ASIA PTE LTD) Products:
    Enotec Oxygen Analyzers are manufactured in Germany for oxygen analysis in the combustion process.
    Enotec system is practically maintenance free, with reliable and highly accurate measurements. To ensure high this level of reliability, the electronics have auto control functions, ensuring minimal maintenance during operation.

    Back to Top

    LEVELSTATE SYSTEM (LEVELSTATE SYSTEMS PTE)
    www.levelstate.com
    Levelstate System (LEVELSTATE SYSTEMS PTE) Products:
    Levelstate Systems Ltd is a UK based company that manufacture boiler drum level monitoring & measuring equipment for the power, petrochemical and manufacturing industries. Our systems are based on conductivity level probe technology.
    Levelstate Systems also produces a high quality bi-color level gauge to compliment our range of electronic units.

    Back to Top

    SUNRUI MARINE ENVIRONMENT ENGINEERING PTE
    www.sunrui.net
    Sunrui Marine Environment Engineering, Pte Products:
    Sunrui involved in developing technology and products of cathodic protection, electrolytic generation of sodium hypochlorite, electrolytic anti-fouling of ship and platforms, ship sewage treatment and coating protection have been extensively applied in fields of ship, harbor installations, marine projects, underground pipelines, power plants, chemical plants, municipal facilities, environment protection.

    Back to Top

    FLAME SCANNERS (BFI AUTOMATION GMBH.)
    www.bfi-automation.de
    Flame Scanners (BFI Automation GmbH.) Products:
    BFI Automation is a German company founded in 1973. The company manufactured flame monitoring equipment (Flame Scanner, Flame Amplifier and Fiber Optic) and burner management systems, products for power plants, gas turbines and refineries.

    Back to Top